Available in SMD2835 and SMD5050 Tri-Chip LED versions with 635nm visible red wavelength.
Designed with 60 LEDs/m density for bright and uniform red illumination.
Operates on DC 12V with a 120° beam angle.
Available in Non-Waterproof and IP65 Waterproof options.
Cuttable every 3 LEDs / 2" for flexible installation and customization.
Supplied in 5 meter (16.4 ft) rolls.
Features flexible white PCB construction with self-adhesive backing.
Dimmable with compatible LED dimmers.
Suitable for indicator lighting, signage, display lighting, decorative lighting, and ambient illumination.
Order & Logistics
Lead Time: Ships within 1–3 business days, occasionally 3–6 business days.
Packing: Cardboard box.
Shipping: Ships from local warehouse in 3–7 days if available, or from headquarters warehouse in 9–18 days by standard shipping or 5–9 days by express shipping.
Technical Specification
Specification
SMD2835 60 LEDs/m
SMD5050 60 LEDs/m
Wavelength
635nm
635–640nm
LED Type
SMD2835
SMD5050 Tri-Chip
Strip Model
SDM2835-300
SDM5050-300
LED Density
60 LEDs/m
60 LEDs/m
Input Voltage
12V DC
12V DC
Power Consumption
<8W/m
<12W/m
Beam Angle
120°
120°
Cuttable Section
3 LEDs / 2"
3 LEDs / 2"
Strip Length
5m (16.4 ft)
5m (16.4 ft)
Strip Size (W×H)
8 × 2 mm
10 × 2 mm
PCB Color
White
White
Waterproof Options
Non-Waterproof, IP65
Non-Waterproof, IP65
Dimmable
Yes (Requires Compatible Dimmer)
Yes (Requires Compatible Dimmer)
Type of LED & Different Waterproof IP Grade
Non-Waterproof: Bare strip with self-adhesive backing, suitable for indoor and dry use.
IP65 Waterproof: Surface covered with protective gel, suitable for areas exposed to sprayed water.
Installation Tips
Always disconnect power supply before cutting or connecting LED light strips.
Do not crimp strip tape or bend strips to a radius less than 15mm.
Do not connect LED strips directly to 120V AC power.
Apply power to test LED strips before mounting.
How to Power / Control the Strip
Choose transformer wattage based on the total power consumption of the LED strips.
Select a transformer with a higher wattage rating than the total strip load for improved reliability.
Using a higher wattage transformer will not damage the strips and helps extend service life.
The strip can be controlled using a wall switch or compatible dimmer.
Multiple strip runs can be controlled using amplifiers and additional power supplies where required.
